Pow mono block Accuphase M-100
Pow mono block Accuphase M-100 thuộc model rất hay của hãng accuphase, công suất cực khỏe 1000W (2ohms) ; 800W (4ohms) ; 500W (8ohms) ; 250W (16ohms). Dễ dàng phối ghép mọi loại loa, chất âm miễn bàn trong tầm giá. Kiểu dáng rất đẹp, sang trọng… có 2 dạng đồng hồ hiển thị số và VU ve vẩy theo nhạc, giá xuất xưởng cục kỳ cao ~ 10.000USD/1 chiếc. Máy đẹp xuất sắc, zin nguyên bản, giá rất tốt.
Thông số kỹ thuật Pow mono block Accuphase M-100
Form Monophonic power amplifier Continuation average output
(20Hz – 20kHz, 0.01% of distortion) 1000W (2ohms)
800W (4ohms)
500W (8ohms)
250W (16ohms) THD (20Hz – 20kHz) 0.01% (between 2ohm-16ohm, 0.25W – a continuation average output) IM distortion (EIA) 0.003% Frequency response 20Hz-20kHz±0dB (at the time of a continuation average output level control MAX)
0.5Hz-400kHz+0 -3 dB (at the time of 1W output level control MAX)
0.5Hz-140kHz+0 -3 dB (at EIA, the time of 1W output level-control 6dB) Gain 28dB Load impedance 2ohm-16ohm Dumping factor (EIA) 300 (50Hz, 8ohms) Input sensitivity/impedance 2.6V/20kohm (at the time of a continuation average output)
0.12V/20kohm (at the time of EIA and 1W output) Input level adjustment Step type Attenuator
Attenuation: They are [ 0 – the 1dB step between -20dB, and ] 25 contacts of -23dB, -30dB, and -infinity henceforth.
Error: Less than ±0.1dB S/N (A compensation) 130dB (at the time of a continuation average output input short-circuit)
100dB (at EIA, the time of 1W output input 1kohm) A low filter 10Hz/17 Hz/30 Hz/50 Hz, -12 dB/oct Power output meter A logarithm compression peak directions type, -60dB-+3dB, and an output Direct-reading scale Digital power display
Form : |
It is a watt display about the peaking capacity at the time of 8-ohm load. |
Display digit number : |
Triple figures |
Display range : |
It is a Direct reading about 0.001W-999W by range change. |
Range |
0.001: 0.001-0.999W
0.01: 0.01-9.99W
0.1: 0.1-99.9W
1:1-999W |
Hold time : |
0.5 second, 3 seconds, 30 minutes |
Frequency response : |
20Hz-20kHz+0 -0.2 dB |
Pulse reply error : |
It is +0 about 100Hz one wave. -0.4 dB |
The semiconductor used Transistor: 57 pieces
FET: Five pieces
IC: 21 pieces
Diode: 65 pieces Power supply voltage AC100V/117V/220V/240V, 50Hz/60Hz Power consumption 175W (at the time of no inputting)
490W (Electrical Appliance and Material Control Law)
780W (at the time of 8-ohm load 500W output) Dimensions the width 480x height 232(piece — it includeds) x depth of 476mm Weight 41.5kg Attachment Timing cable (1.5m) Option Side wood A-14 (one set with attachment lug, 16,000yen)
Fan for heat dissipation O-81 (one set, 8,000yen)
Timing cable TC-11 (10m, 3,000yen)
Thông số kỹ thuật Pow mono block Accuphase M-100
Form Monophonic power amplifier Continuation average output
(20Hz – 20kHz, 0.01% of distortion) 1000W (2ohms)
800W (4ohms)
500W (8ohms)
250W (16ohms) THD (20Hz – 20kHz) 0.01% (between 2ohm-16ohm, 0.25W – a continuation average output) IM distortion (EIA) 0.003% Frequency response 20Hz-20kHz±0dB (at the time of a continuation average output level control MAX)
0.5Hz-400kHz+0 -3 dB (at the time of 1W output level control MAX)
0.5Hz-140kHz+0 -3 dB (at EIA, the time of 1W output level-control 6dB) Gain 28dB Load impedance 2ohm-16ohm Dumping factor (EIA) 300 (50Hz, 8ohms) Input sensitivity/impedance 2.6V/20kohm (at the time of a continuation average output)
0.12V/20kohm (at the time of EIA and 1W output) Input level adjustment Step type Attenuator
Attenuation: They are [ 0 – the 1dB step between -20dB, and ] 25 contacts of -23dB, -30dB, and -infinity henceforth.
Error: Less than ±0.1dB S/N (A compensation) 130dB (at the time of a continuation average output input short-circuit)
100dB (at EIA, the time of 1W output input 1kohm) A low filter 10Hz/17 Hz/30 Hz/50 Hz, -12 dB/oct Power output meter A logarithm compression peak directions type, -60dB-+3dB, and an output Direct-reading scale Digital power display
Form : |
It is a watt display about the peaking capacity at the time of 8-ohm load. |
Display digit number : |
Triple figures |
Display range : |
It is a Direct reading about 0.001W-999W by range change. |
Range |
0.001: 0.001-0.999W
0.01: 0.01-9.99W
0.1: 0.1-99.9W
1:1-999W |
Hold time : |
0.5 second, 3 seconds, 30 minutes |
Frequency response : |
20Hz-20kHz+0 -0.2 dB |
Pulse reply error : |
It is +0 about 100Hz one wave. -0.4 dB |
The semiconductor used Transistor: 57 pieces
FET: Five pieces
IC: 21 pieces
Diode: 65 pieces Power supply voltage AC100V/117V/220V/240V, 50Hz/60Hz Power consumption 175W (at the time of no inputting)
490W (Electrical Appliance and Material Control Law)
780W (at the time of 8-ohm load 500W output) Dimensions the width 480x height 232(piece — it includeds) x depth of 476mm Weight 41.5kg Attachment Timing cable (1.5m) Option Side wood A-14 (one set with attachment lug, 16,000yen)
Fan for heat dissipation O-81 (one set, 8,000yen)
Timing cable TC-11 (10m, 3,000yen)